Hi all, a friend of my wanted me to weather up his 1/18 yellow Interceptor as in the movie with the mud down the the side of the car, which is fine but looking at the model I notice it has Radial TA's on the car
That's not right... They look like they were National XT Renegades. So armed with a flat bed printer at work I printed on the back side of the tyres. I'll go and count some rivets now...
DDA's 1/18 yellow Interceptor tyres
DDA's 1/18 yellow Interceptor tyres
- Attachments
-
- XT RENEGADE tyre.jpg (33.99 KiB) Viewed 21845 times
-
- yellow-xb-sunraysia-wheels.jpg (17.29 KiB) Viewed 21845 times
Last edited by Wozza on Tue Jul 02, 2019 8:24 pm, edited 1 time in total.
Re: DDA's 1/18 yellow Interceptor tyres
Here is the result, they will be dirtied up a bit.
- Attachments
-
- XT RENEGADE tyres.jpg (95.91 KiB) Viewed 21844 times
Re: DDA's 1/18 yellow Interceptor tyres
Well, a quick muddy up with now the National XT Renegade printed tyres and an aerial on the boot, now back to its owner Hope he is happy with it.
- Attachments
-
- right side.jpg (487.34 KiB) Viewed 21831 times
-
- rear left.jpg (674.21 KiB) Viewed 21831 times
-
aussie muscle
- Posts: 969
- Joined: Tue Apr 18, 2006 7:00 am
- Location: Bombala Australia
Re: DDA's 1/18 yellow Interceptor tyres
Kool!
I never even bothered with putting the tirewall text on mine.
Are you going to release the mesh so others can print them out? I usually add my stuff to thingiverse.
(nothing mad max related yet)
https://www.thingiverse.com/aussiemuscle/designs
I never even bothered with putting the tirewall text on mine.
Are you going to release the mesh so others can print them out? I usually add my stuff to thingiverse.
(nothing mad max related yet)
https://www.thingiverse.com/aussiemuscle/designs
============
My model Gallery: https://www.flickr.com/photos/87459383@N07/albums
My model Gallery: https://www.flickr.com/photos/87459383@N07/albums
Re: DDA's 1/18 yellow Interceptor tyres
To be honest I just opened that first image of the tyre in Photoshop and copied just the text off and then sized it to fit the tyre then printed directly to the back side of them using a flat bed printer like this one in the photo.
So unfortunately there is no mesh as such just a 2D image as you can see its not too sharp but because of the end size of it and most of the print would be weathered off I was not to worried about it,
and also thanks to Wayne who helped identify to tyre to begin with.
So unfortunately there is no mesh as such just a 2D image as you can see its not too sharp but because of the end size of it and most of the print would be weathered off I was not to worried about it,
and also thanks to Wayne who helped identify to tyre to begin with.
- Attachments
-
- NATIONAL XT RENEGADE logo prints .jpg (46.27 KiB) Viewed 21779 times
-
- UV-printer-impala-swissqprint.png (376.9 KiB) Viewed 21779 times
-
Turbofurball
- Posts: 494
- Joined: Sat May 16, 2015 5:05 am
Re: DDA's 1/18 yellow Interceptor tyres
That finished model looks absolutely cracking!
Re: DDA's 1/18 yellow Interceptor tyres
Thank's Turbofurball.
Re: DDA's 1/18 yellow Interceptor tyres
Looks great
-
waynegt351
- Posts: 335
- Joined: Mon Apr 18, 2005 7:43 am
Re: DDA's 1/18 yellow Interceptor tyres
thanks mate .... htis is my car that Wozza modified for me .... very happy with how it turned out ..Pkdiorama wrote:Looks great
speed is just a question of money,how fast do you wana go !!
-
faizanmazhar00
- Posts: 6
- Joined: Tue Feb 08, 2022 7:23 am
Re: DDA's 1/18 yellow Interceptor tyres
thanks mate .... htis is my car that Wozza modified for me .... very happy with how it turned out ..Wozza wrote: ↑Fri Jun 28, 2019 10:18 pm Hi all, a friend of my wanted me to weather up his 1/18 yellow Interceptor as in the movie with the mud down the the side of the car, which is fine but looking at the model I notice it has Radial TA's on the car .
That's not right... They look like they were National XT Renegades. So armed with a flat bed printer at work I printed on the back side of the tyres. I'll go and count some rivets now...